Snom D735 - Call forwarding; Forward All; Forward when Busy; After timeout

To Next Page

To Previous Page

D735 User Manual Using the Phone

Fig. 1 Fig. 2

6. Press for two seconds to return to the idle screen.

Call forwarding

The phone can be set to forward incoming calls, either always or under certain conditions. The

settings can be done on the phone and on the web interface. For further information on using the web

interface for these settings, see "Call forwarding" on page 93.

Note: Call forwarding is set separately for each conﬁgured identity. When the setting is

done on the phone, it applies to the identity selected as outgoing identity.

Forward All: Forwarding all incoming calls to the number of the phone, extension, or mailbox

speciﬁed as this function’s target.

Fig. 1 Fig. 2 Fig. 3

In the default setting, the symbol / is available in the function key line and can be used to

turn forwarding of all calls for the current outgoing identity on and o, respectively, by pressing the

function key underneath the symbol, but you can also map the function onto another function key or

use the settings menu as shown in the table below. To turn on call forwarding of all calls for other

conﬁgured identities, select each one in turn as the outgoing identity and repeat the setting (Fig. 3).

Forward when Busy: Forwarding calls ringing while the phone is busy to the number of the phone,

extension, or mailbox speciﬁed as this function’s target.

Forward after Timeout: When a call starts ringing, the phone will wait for the number of seconds

speciﬁed in the setting "Call forwarding time". If the call is not accepted by the end of this time period,

it is forwarded to the number of the phone, extension, or mailbox speciﬁed as this function’s target.

Other manuals for Snom D735