Snom D735 - Call Forwarding

93
D735 User Manual Customizing the Phone Settings
Call forwarding
This feature automatically redirects all or certain incoming calls to another phone or a mailbox.
Call forwarding is configured for each identity separately. On the web interface, the settings are
configured on the Configuration identity (1-12) pages. If you set call forwarding on the phone, the
settings are applied to the identity selected as the outgoing identity at the time of the configuration;
the configuration must be repeated with the same or dierent settings for each identity.
Always
All incoming calls are forwarded to the number of the phone, extension, or mailbox specified as this
function's target.
When busy
Calls ringing while the phone is busy are forwarded to the number of the phone, extension, or mailbox
specified as this function's target.
After timeout
When a call starts ringing, the phone will wait for the number of seconds specified as "call forwarding
time". If the call has not been accepted by the end of this time period, it is forwarded to the number of
the phone, extension, or mailbox specified as this function's target.
When a call starts ringing, the phone will wait for the number of seconds specified as "call forwarding
time". If the call has not been accepted by the end of this time period, it is forwarded to the number of
the phone, extension, or mailbox specified as this function's target.
Configuring the settings on the phone: See "Making/changing the settings on the phone
and turning on call forwarding" on page 65 .
Configuring the settings on the web interface
If your internet telephony provider or your PBX uses codes to turn functions on and o, refer to their
manuals for the codes to enter in "On Code"/"O Code" text fields or ask your administrator.
Setting forwarding numbers
• Forwarding all incoming calls:
1. Open Configuration Identity > Features tab > Call Forwarding > Always.
2. Type the phone number in the "Target" text field. Type each number the way it needs to be
dialed by the phone, without spaces or punctuation between the digits.
3. Click on Apply and Save.
• Forwarding incoming calls when the phone is busy:
1. Open Configuration Identity > Features tab > Call Forwarding > Busy .
2. Type the phone number in the "Target" text field. Type each number the way it needs to be
dialed by the phone, without spaces or punctuation between the digits.
3. Click on Apply and Save.