Wire EDM Machine Operation Table Of Contents
Copyright June, 98 Sodick Inc.
PUNCHES 9-1
DIES 9-2
FORM TOOLS 9-3
WORDS INVOLVED IN SUBROUTINES 9-3
SUBROUTINES INVOLVE FOUR PROGRAMMING WORDS: 9-3
PUNCH EXAMPLE 9-4
DIE EXAMPLE 9-6
CHAPTER 10 DESCRIPTION OF OPERATING AIDS 10-1
Q ROUTINE TECHNIQUES (MACROS) 10-1
WHAT IS A Q ROUTINE? 10-1
MACHINE START-UP Q ROUTINE 10-2
VARIABLES IN Q ROUTINES 10-2
ARITHMETIC IN A Q ROUTINE 10-4
OVAL SHAPED DIE BUTTON EXAMPLE 10-5
G AND M CODES FOR Q ROUTINES 10-7
G83 - Transfer Current Position Into H Register 10-7
COORDINATE SYSTEM SHIFTING (G54-G959) 10-8
EASILY PROGRAMMING MULTIPLE DIE OPENINGS 10-8
USING A COORDINATE SYSTEM TO KEEP TRACK OF THE MACHINE’S POSITION 10-9
USING COORDINATE SYSTEM SHIFTING TO COMPARE MEASUREMENTS 10-10
MIRROR IMAGE AND AXIS EXCHANGE 10-10
SUBROUTINE TECHNIQUES 10-13
SCALING 10-13
AUTOMATIC CORNER ROUNDING 10-14
USING AUTOMATIC CORNER ROUNDING “R WORD” 10-14
AXIS ROTATION 10-16
STRING FILE 10-16
EXAMPLE OF STRING FILE 10-17
CHAPTER 11 PRACTICE EXERCISES 11-1
PRACTICE EXERCISES CHAPTER ONE 11-1
PRACTICE EXERCISES CHAPTER TWO 11-4
PRACTICE EXERCISES CHAPTER THREE 11-5
PRACTICE EXERCISES CHAPTER FOUR 11-7
PRACTICE EXERCISES CHAPTER FIVE 11-8
PRACTICE EXERCISES CHAPTER SIX 11-10
PRACTICE EXERCISES CHAPTER SEVEN 11-11
PRACTICE EXERCISES CHAPTER EIGHT 11-14
PRACTICE EXERCISES CHAPTER NINE 11-15
CHAPTER 12 MAINTENANCE 12-1
DISPLAY MAINTENANCE SCREEN 12-1
MAINTENANCE CHECKLIST 12-2
BY THE HOUR CHECKS 12-2
To Next Page
Loading...