6.11.3 Display information field
What data is displayed in the information field is controlled in Setup Mode / Program Settings /
Neutral Measurements / Display Information Field.
The following options are available:
• Factory default: Switching between the individually used functions, e.g. control indicator
light, totaling memory, Organization Data Memory.
• Control display: Continuous display of the indicator light function.
• Total: continuous display of totaling memory.
• Last item: Continuous display of the last item.
• Organization data + database: Continuous display of the organization data memories.
• Fixed neutral measurement values: continuously displays the enabled memory of the
specific weight.
• Display barcode: Continuous display of the scanned barcode.
Example: information field display setting to fixed neutral measurement values:
Example: the control display shows a indicator light indicator in the information field.
1. Below tolerance 2. Within tolerance 3. Above tolerance
(Exact target value reached)
To Next Page
Loading...
