Soehnle 3035 - Neutral Measurement with Several Weighing Bridges; Display Options with the Info Key

145
Record/print within or outside of tolerance
The release of a data record outside of a specified tolerance range can be prevented or accepted.
If a data record is released outside of the tolerance, it is marked with a special character. Release
or lock are set in setup mode under Program Settings / Neutral Measurement / Record Outside of
Tolerance.
End quantity control
Press the Function Page key to start the level 2 control functions and press the F5 Quantity
Contr. key; then delete with the F2 Delete key or delete everything with the key.
6.11.8 Neutral measurement with several weighing bridges
If several scales are connected, each scale can be used to determine the specific weight. For best
results, the specific weight should be determined on the scale with the smallest number
increments. Select the scale with scale key.
After determining the specific weight, the switch can be made to a higher capacity bulk scale. This
way, larger quantities can be accurately measured with the reference weight determined on the
reference scale.
6.11.9 Display options with the Info key
Pressing the key gives you the following options:
•
F1 Fixed tare
Displays the stored fixed tare values (fixed tare memory).
•
F2 Neu Me Fix
Displays the stored fixed neutral measurement values (Neu.Me.Fix memory)
•
F3 Quantity Contr.
Displays the current target value with tolerance
•
F4 Total
Displays the current totals in the totaling memory
•
F5 Plus
Displays all items stored in the totaling memory (item list). The individual items can be
retrieved with the Arrow keys (F3/F4).
•
Tare key
Displays the current tare weight in tare memory.
Press the key after pressing the key.