Soehnle 3035 - USB

201
Baud rate
• 1200
• 2400
• 4800
• 9600
• 19200
• 38400
Factory default: 9600
Data bits
• 7
• 8
Factory default: 8
Parity
• none
• even
• odd
Factory default: none
Xon / Xoff
• Off
• On
Factory default: off
Factory default
• Do not execute
• Execute
Execute resets all custom settings in this parameter area back to factory defaults.
See the separate interface description 470.508.090 for more information about all interfaces.
7.5 USB
The hardware for the RS 232 (internal) Interface 1 is mounted on the motherboard. Depending on
the terminal configuration, the interface is routed externally with a 4-pin socket.
A special connection cable is required depending on how the interface is used. Contact your dealer
or a Soehnle Industrial Solutions service partner with any related questions.
Programming parameters
Start setup mode with F6 key in the Setup Functions key level.
Highlight Communication with the F4 Arrow key, F6 Next.
Highlight USB with the F4 Arrow key, F6 Next.
Press F6 Next in USB use: