Soehnle 3035 - Organization Data (Identifier); Settings in Setup Mode

76
Pressing the F5 Enter Fix key directly saves the value to fixed memory.
The data entry window for fixed tare values is displayed.
The fixed tare value name is entered by pressing the F6 Edit key.
Enter the name on the keypad and save the entry by pressing the F6 Save key.
6.6.17 Organization data (Identifier)
Detailed information about organization data can be found in Section 5.11 on page 45.
6.6.18 Settings in setup mode
The parameters in setup mode allow you to customize the application program Totaling and Picking
to your specific needs.
Start setup mode by pressing the F6 Setup Mode key in the settings function level, and from there
press F6 Save to start Program Settings.
F6 Next retrieves the program settings for the highlighted application program
2
Totaling + picking
Totaling or picking
Select
totaling or picking for the following settings.
Totaling
means that the individual items are removed from the scale after they
have been saved to totaling memory.
Picking
means that the individual items remain on the scale after they have been
saved to totaling memory, and that the next item is placed on the scale. Factory
default: Totaling
Preferred totaling
scale
Select
none, scale xx, scale xx, etc.
What scale No. is used for the resolution of the totaling memory.
For None, the currently enabled scale is always used for the first totaling. Factory
default: none