Chapter 2 - Power up and down the device
Copyright 2016 Softing Industrial Automation GmbH
17
Activate sleep mode
If you want to change manually to sleep mode, shortly actuate the power key. During sleep mode the
BC-700-PB is saving energy and the power key will blink slowly. If a measurement function is currently
active, it is not possible to switch to sleep mode. Depending on the settings in energy management, the
BC-700-PB may automatically change to sleep mode after a predefined period of time.
Return to normal operation mode
You can recover normal operation very quickly by shortly actuating the power key a second time. The
lastly shown menu screen will be displayed which was active before changing to sleep mode.
Automatic power-down
If the BC-700-PB is in sleep mode for more than 2 hours, it will automatically power down.
To Next Page
Loading...