Chapter 7 - Maintenance and Servicing
Copyright 2016 Softing Industrial Automation GmbH
41
7
Maintenance and Servicing
The BC-700-PB is maintenance-free and does not require calibration. We recommend excluding this
device from control of measuring and monitoring of devices. Repairs may only be carried out by the
device manufacturer. All returns must be made without supplied carrying case and accessories (unless
otherwise agreed). Please also include a brief fault description and a phone number at which we can
contact you should we need further details. Please also include a brief fault description and a phone
number at which we can contact you should we need further details. In case of returns within the
warranty period, please also enclose a copy of the invoice or delivery note.
The built-in battery is subjected to normal wear and tear. The battery capacity decreases in the course
of years; this is typical for specified normal operation. Exhaustive discharge and overcharge or
exhaustive operation of the device in conjunction with very high or low temperatures will accelerate
the battery aging process (refer to Notes on battery use) .
51
To Next Page
Loading...