Softing PROFIBUS Tester 5 - Document History; Delivery Scope

Chapter 1 - Introduction
Copyright 2016 Softing Industrial Automation GmbH
9
1.2.4 Document history
Document version
Modifications compared to previous version
Version 1.00
none - initial publication
Version 1.01
Editorial modifications following internal review
Order numbers for optional accessories added
New device status icons added
New cable test note added
Version 1.10
Revised and enhanced PA-specific topics
Internal battery is installed upon delivery - new section "Replace battery"
inserted.
Added a recommendation with respect to cable shield
Added reference about Softing License Manager
Version 1.11
New optional accessory
Modified battery descriptions
Document structure optimized
Version 1.20
Note regarding providing device serial number when ordering the PA-H1-
Adapter and activating the license
New section describing how to work with the PA-Adapter BC-700-H1
Version 1.30
New test function Locate Stations
New oscilloscope functionality in stand-alone mode with result display
and without need to use PROFIBUS Diagnostics Suite (requires additional
license, refer to Licenses )
Segments, locations and networks can be created in the PROFIBUS
Diagnostics Suite and then be downloaded to the BC-700-PB (refer also to
the PROFIBUS Diagnostics Suite online help for more information)
1.3 Delivery scope
The BC-700-PB carrying case contains:
Test tool with RS485 interface
Rechargeable battery pack (internal battery)
Wide-range power supply with European and US mains power cables
RS485 D-sub adapter cable BC-600-PB-CB-DSUB-2 “Standard” (cable petrol blue, light connector) for
PROFIBUS DP
USB cable, 2 m
Terminal block for trigger input/output
CD-ROM with driver software, PC software and detailed integrated help system in English and
German
Documentation for BC-700-PB and for the PROFIBUS Diagnostics Suite PC software
33
33
39
33