SolarEdge SE66.6KUS - Page 36

d.
Attachtheotherendoftheconduitconnectortotheconduitentryonthesideofthe
ConnectionUnitandpushitinuntilitclicksintoplace.
Figure 26: Connecting the conduit to the Connection Unit
NOTE
WhenconnectingtherightSecondaryunittotheConnectionUnit,loopthe
conduitbeforeconnectingittotheConnectionUnit.
e.
Connectthelugswiththesuppliedmachinescrewtooneofthecaptivescrewsatthetop
corneroftheConnectionUnit.IfyouareusinganotherSecondaryUnitrepeatthisstep
toconnectthelugstotheConnectionUnit.
Figure 27: Connecting the interlock
f. ConnecttheDCwires(PlusandMinus)fromtheSecondaryUnit(s)totheterminalblocksin
theConnectionUnit.IfyouareusinganotherSecondaryUnitrepeatthissteptoconnectthe
DCwirestotheConnectionUnit.
Chapter 3: Installing the Primary and Secondary Unit(s)
-Three Phase Inverter with Synergy Technology Installation MAN-01-00402-1.4
35