SolarMax 4000P - Notes on the present instruction manual; Scope; Target groups; Where to keep this manual

68
1 Notes on the present instruction
manual
1.1 Scope
This instruction manual is applicable to the Solarmax 2000P, 3000P, 4000P, 4600P and
5000P inverters.
1.2 Target groups
Plant operators
 Chapter 2 "Safety instructions"
 Chapter 7 "Operation"
Fitters
 Chapter 2 "Safety instructions"
 The instructions in chapters 4 to 6 and 8 to 10 are only allowed to be performed by
trained skilled electricians (e.g. electricians, electric systems technicians, electrical
mechanics, industrial electronics technicians).
1.3 Where to keep this manual
The plant operator must ensure that this instruction manual is available to the relevant
persons at all times. If this original document is lost, an up-to-date version of this instruc-
tion manual can be downloaded from our website at any time (www.solarmax.com).
1.4 Symbols used
The following safety instructions and general information are used within this instruction
manual.
DANGER!
Non-observance of these safety instructions may immediately cause serious
injuries or death.
WARNING!
Non-observance of these safety instructions may cause serious injuries.
CAUTION!
Non-observance of these safety instructions may cause minor or medium
injuries.