69
ATTENTION!
Non-observance of these safety instructions may cause material damage.
Note
Notes contain additional information or facilitate the inverter operation.
2 Safety instructions
2.1 Intended use
The SolarMax P series inverters are designed exclusively to convert the direct current
generated by PV modules into alternating current which conforms to the parameters of
the public grid. Any other use is contrary to the design purpose.
The inverters of the P series may only be connected to Class II PV generators.
2.2 Safety instructions
DANGER!
Fatal electric shock hazard!
In daylight the PV generator supplies the inverter with a dangerously high DC
voltage.
Make sure that all electrical feed-in lines to the inverter are de-energized
before starting any work on the inverter or the feed-in lines.
DANGER!
Fatal electric shock hazard!
Components within the inverter are charged with a high voltage.
Never open the inverter while it is in operation.
WARNING!
Risk of injury from electric arc!
Removing the DC connector when live can lead to dangerous electric arcs.
Switch off the DC disconnector at the inverter before removing the DC
connectors.
To Next Page
Loading...
