70
2.3 Symbols on the inverter
Symbol Description
Protective conductor connection
The DC disconnector is switched off (the contacts are open).
The DC disconnector is switched on (the contacts are closed).
Risk of death through high voltages! Only qualied electricians may
perform work on the inverter.
Careful - hot surfaces!
5 min
Risk of death due to high voltages! De-energize the inverter. Proceed
to wait for 5 minutes before opening the inverter.
Only qualied electricians may perform work on the inverter.
Read the operating instructions - Please read and follow the instruc-
tions supplied with the inverter. Do not remove any symbols on the
inverter. Replace damaged symbols.
CE marking - The inverter complies with the requirements of the
European EMC Directive 2004/108/EC and the Low Voltage Directive
2006/95/EC (see Section 11).
VDE-GS mark - The inverter complies with the relevant requirements
of the German Product Safety Act.
Do not dispose of the inverter and its accessory components in the
household waste.
To Next Page
Loading...
