50
Status message Cause Measure
Program Firmware The inverter rmware is cur-
rently being updated.
The inverter automatically
resumes mains operation
once the rmware update is
complete.
9 Maintenance
SolarMax inverters are basically maintenance-free. However, in order to ensure perfect
operation over the course of several years, in addition to regular controls of the operating
and yield data via the inverter display or remote monitoring, we also recommend per-
forming the simple maintenance work described below at regular intervals. The mainte-
nance intervals must be set keeping the ambient conditions in mind (especially exposure
to dust).
The following checks can be performed by the plant operator. If you discover problems
while performing these checks, contact the electrician in charge of maintenance or our
SolarMax Service Centre.
Functional check of the inverter using the graphics display
On-site check of visible traces of wear and tear (damage, rain, snow, rodents, etc.)
Cleaning and check of plant room
Cleaning the fan screens
10 Disposal
Please dispose of the inverter at the end of its service life in compliance with the disposal
regulations then valid where it is installed. You can also return the inverter at your own
cost for professional disposal to SolarMax Produktions GmbH.
To Next Page
Loading...
