2 Safety instructions
The MT series solar inverters have been designed and tested according to the latest tech-
nological advances and the currently valid product safety standards. However, ignoring
the safety instructions contained in this instruction manual may endanger the user, a third
party, or property. The qualied electrician and the operator of the PV plant can minimise
these risks by following the safety instructions at all times.
DANGER
Only qualied electricians who have already completely read and understood this
instruction manual in advance may install SolarMax inverters.
The photovoltaic generator supplies direct current to the inverter when the PV
modules are exposed to sunlight.
The inverters must remain closed at all times during operation.
The responsible electrician shall be responsible for complying with the applicable
local installation and safety regulations.
Ignoring the installation and safety instructions shall forfeit any and all warranty
and liability claims.
2.1 Appropriate use
The SolarMax MT series string inverters are designed exclusively to convert the direct
current generated by PV modules into grid-compliant alternating current.
The inverters may only be used in combination with PV modules which comply with the
IEC 61730 standard. Any other use, in particular the conversion of direct current from
batteries or other storage elements into alternating current is not permissible.
Any other use is contrary to the purpose for which the inverters were designed. SolarMax
Produktions GmbH accepts no liability for damages resulting from using inverters for pur-
poses other than this. Any modications to the inverter performed by the plant operator
or the tter without any review or approval by SolarMax Produktions GmbH are prohibited.
To Next Page
Loading...
