8
2.2 Symbols on the inverter
Symbol Description
Protective conductor connection
DC disconnector Q1 position OFF - In this position the DC discon-
nector Q1 is off (open)
DC disconnector Q1 position ON - In this position the DC disconnec-
tor Q1 is on (closed)
Risk of death through high voltages! Only qualied electricians may
perform work on the inverter.
Careful - hot surfaces!
5 min
Risk of death due to high voltages! De-energize the inverter. Pro-
ceed to wait for 5 minutes before opening the inverter.
Only qualied electricians may perform work on the inverter.
Read the operating instructions - Please read and follow the instruc-
tions supplied with the inverter. Do not remove any symbols on the
inverter. Replace damaged symbols.
CE marking - The inverter complies with the requirements of the
European EMC Directive 2004/108/EC and the Low Voltage Direc-
tive 2006/95/EC.
C-Tick - compliance with the Australian EMC regulations
Do not dispose of the inverter and its accessory components in the
household waste.
To Next Page
Loading...
