SolaX Power X3-Hybrid G4 Series - Page 176

168
Appendix
Accessories required for two direct-connected meters
B
CA
F
E
D
G
H
Figure 15-37 Accessories required
Figure 15-38 Accessories list
Item Description Quantity Source
A DTSU666
2 sets Delivered with meter (Optional)B Two-core network cable
C RJ45 terminal
D RJ45 terminal 1 pc Delivered with inverter
E RJ45 splitter adapter 1 Prepared by user
F CAT5E network cable 1 Prepared by user
G Copper wire / Prepared by user
F
Waterproof connectors
with RJ45
1 pc Delivered with inverter
Wiring procedures for two direct-connected meters
a. Connect the meter and inverter. For detailed steps, see "15.6.2 Connection of
Direct-connected Meter". Please note that the RJ45 splitter adapter should be
placed in a proper waterproof enclosure.