47
Electrical Connection
Grid
EPS (off-grid)
Figure 8-12 Crimping the conductors
Step 5: Remove the dustproof cover from the inverter.
M5
Figure 8-13 Removing the dustproof cover
Step 6: Insert the crimped conductors into the AC terminal according to the labeling and
tighten the terminal screws (torque: 0.7±0.1 N·m). Install the AC protective cover,
and lock the cover with torque wrench. ( Torque: 2.0±0.2 N·m)
Grid
EPS (off-grid)
L1 L2L3 NPE
L1 L2L3 N
0.7±0.1 N·m
M5
2.0±0.2 N·m
M3
Figure 8-14 Installing the AC protective cover
To Next Page
Loading...
