70
Electrical Connection
Monitoring wiring procedure
Wi-Fi mode:
a. Assemble the dongle.
M2.5
0.8 ± 0.1 N·m
Figure 8-55 Assembling the dongle
b. Plug the dongle to the inverter.
Figure 8-56 Connecting to the inverter
CAUTION!
• The buckles on the inverter and dongle must be on the same side. Otherwise, the
dongle may be damaged.
NOTICE!
• The distance between the router and the inverter must be no more than 100 meters.
If there are walls in between, the distance must be no more than 20 meters.
• For locations where Wi-Fi signals are weak, install a Wi-Fi signal booster.
NOTICE!
• For details on Wi-Fi configuration, see Pocket WiFi + LAN installation manual
.
You can
configure Wi-Fi only after the inverter is powered on.
To Next Page
Loading...
