SolaX Power X3-Hybrid Series - Page 56

Setting
Setting
ALL Test
Test report
Ovp(59.S2) test
Uvp(27.S1) test
Uvp(27.S2) test
Ofp(81>.S1) test
Ufp(81<.S1) test
Ofp2(81>.S2) test
Ufp2(81<.S2) test
Ovp10(59.S1) test
Vt: 0.0V Tt: 0ms
Vs: 0.0V To: 0ms
V0: 0.0V Test/Pass
Ovp(59.S2)test
All Test
Self Test
Vt: 0.0V Tt: 0ms
Vs: 0.0V To: 0ms
V0: 0.0V Test/Pass
Uvp(27.S2)test
Vt: 0.0V Tt: 0ms
Vs: 0.0V To: 0ms
V0: 0.0V Test/Pass
Ufp2(81<.S1)test
Vt: 0.0V Tt: 0ms
Vs: 0.0V To: 0ms
V0: 0.0V Test/Pass
Uvp(27.S1)test
Vt: 0.0V Tt: 0ms
Vs: 0.0V To: 0ms
V0: 0.0V Test/Pass
Ofp(81>.S1)test
Vt: 0.0V Tt: 0ms
Vs: 0.0V To: 0ms
V0: 0.0V Test/Pass
Ofp2(81>.S2)test
Vt: 0.0V Tt: 0ms
Vs: 0.0V To: 0ms
V0: 0.0V Test/Pass
Ufp2(81<.S2)test
Vt: 0.0V Tt: 0ms
Vs: 0.0V To: 0ms
V0: 0.0V NA/Pass
Ovp_10(59.S1)test
Vt: 0.0V Tt: 0ms
Vs: 0.0V To: 0ms
V0: 0.0V Test/Pass
Ovp(59.S2)result
Test Report
Self Test
Vt: 0.0V Tt: 0ms
Vs: 0.0V To: 0ms
V0: 0.0V NA/Pass
Uvp(27.S1)result
Vt: 0.0V Tt: 0ms
Vs: 0.0V To: 0ms
V0: 0.0V NA/Pass
Uvp(27.S2)result
Vt: 0.0V Tt: 0ms
Vs: 0.0V To: 0ms
V0: 0.0V NA/Pass
Ofp(81>.S1)result
Vt: 0.0V Tt: 0ms
Vs: 0.0V To: 0ms
V0: 0.0V NA/Pass
Ufp(81<.S1)result
Vt: 0.0V Tt: 0ms
Vs: 0.0V To: 0ms
V0: 0.0V NA/Pass
Ofp2(81>.S2)result
Vt: 0.0V Tt: 0ms
Vs: 0.0V To: 0ms
V0: 0.0V NA/Pass
Ufp2(81<.S2)result
Vt: 0.0V Tt: 0ms
Vs: 0.0V To: 0ms
V0: 0.0V NA/Pass
Ovp10(59.S1)result
6 ) Self Test (only for CEI 0-21)
The self test function allows users to test the following items. "Full test",
"Ovp(59.S2) test"27. "Uvp (s1) test", "Uvp (27. s2) test", "Ofp (81> .S1) test",
"Ufp (81 <.S1) test", "Ufp (81> .S2) test", "Ufp (81 <.S2) test",
"Ovp10 (59. s1) test".
In the self-test interface, the user can select "all tests" or a single test item
for testing.
Before testing, make sure that the inverter is connected to the grid.
All tests take about 6 minutes. And it will display "Success" and then
"Delivery".
For a single test item, it takes about a few seconds or minutes.
Click "Test Report" to view the test results of all items.
104
105