1 Getting Started
1-15
SolSensor 300 and SolSensor 300V2 Safety and Regulatory
Warnings, Cautions, and Notes
Before operating SolSensor, familiarize yourself with the following notations.
WARNING A Warning calls attention to a procedure, which, if not performed correctly, could
result in personal injury or loss of life. Do not proceed beyond a warning note until
the indicated conditions are fully understood and met.
CAUTION A Caution calls attention to a procedure that, if not performed correctly, could result in
damage to, or destruction of, the instrument. Do not proceed beyond a caution note until
the indicated conditions are fully understood and met.
NOTE A Note provides important or special information.
Declaration of Conformity
A declaration of conformity is available upon request.
Cleaning
To remove dirt or dust from the SolSensor enclosure, use a dry or slightly dampened
cloth only.
The irradiance sensor (white disc) is cleaned using a more carefully controlled process, to
avoid damaging the irradiance sensor. See the SolSensor 300 Precautions/Cleaning
section for details.
WARNING To prevent electrical shock, disconnect SolSensor from the battery charger before
cleaning. Use only a dry cloth or cloth slightly dampened with water to clean the
external enclosure parts. Do not attempt to clean internally.
WARNING The irradiance sensor (white disc) is a precision instrument and is easily damaged if
cleaned improperly. See the SolSensor 300 Precautions/Cleaning section for the
proper cleaning process.
Instrument Markings
The SolSensor 300 and SolSensor 300V2 have the following markings on the front
and/or rear panel. Familiarize yourself with these markings before operating the
SolSensor.
To Next Page
Loading...
Need help?
General
