This symbol indicates separate collection for electrical and electronic
equipment, mandated under EU law as of August 13, 2005. All electrical
and electronic equipment are required to be separated from normal waste
for disposal. (Reference WEEE Directive, 2002/96/EC.)
SolSensor (original) Safety and Regulatory
Warnings, Cautions, and Notes
Before operating SolSensor, familiarize yourself with the following notations.
WARNING A Warning calls attention to a procedure, which, if not performed correctly, could
result in personal injury or loss of life. Do not proceed beyond a warning note until
the indicated conditions are fully understood and met.
CAUTION A Caution calls attention to a procedure that, if not performed correctly, could result in
damage to, or destruction of, the instrument. Do not proceed beyond a caution note until
the indicated conditions are fully understood and met.
NOTE A Note provides important or special information.
Declaration of Conformity
A declaration of conformity is available upon request.
Cleaning
To remove dirt or dust from the SolSensor enclosure, use a dry or slightly dampened
cloth only.
The irradiance sensor (white disc) is cleaned using a more carefully controlled process, to
avoid damaging the irradiance sensor. See the SolSensor Precautions/Cleaning section for
details.
WARNING To prevent electrical shock, disconnect SolSensor from the battery charger before
cleaning. Use only a dry cloth or cloth slightly dampened with water to clean the
external enclosure parts. Do not attempt to clean internally.
WARNING The irradiance sensor (white disc) is a precision instrument and is easily damaged if
cleaned improperly. See the SolSensor Precautions/Cleaning section for the proper
cleaning process.
To Next Page
Loading...
Need help?
General
