Check this menu item to display, as shown here the controls for
selecting your irradiance, temperature, and tilt sensing options. See
Chapter 6 Measuring Irradiance, Temperature, and Tilt for guidance
on sensor choices.
The controls shown in the figure below allow you to change the
sensor choices for all of the measurements currently saved in the
project. Select the desired sensors from the dropdown lists.
CAUTION: This action cannot be undone. Create a backup file
before taking this action.
See Chapter 6 Measuring Irradiance, Temperature, and Tilt for
information on your sensor choices.
To Next Page
Loading...
Need help?
General
