4-3
DNW-A220
DNW-A220P
4-1. Periodic Maintenance
4-1-3. Hours Meter
This unit can display an hours meter on the LCD monitor. Perform a periodic check with this hours meter
as a reference.
1. Contents of display
Menu No. Display Contents
H01 OPERATION HOURS Sum of energized time
H02 DRUM RUNNING HOURS Sum of drum rotating time
H03 TAPE RUNNING HOURS Sum of tape running time
H04 THREADING COUNTER Sum of threading
H12 DRUM RUNNING HOURS Sum of drum rotating time (Resettable)
H13 TAPE RUNNING HOURS Sum of tape running time (Resettable)
H14 THREADING COUNTER Sum of threading (Resettable)
2. Display procedures
(1) Press the MENU button of the control panel to display the menus and their contents.
(2) Press the MENU button again to exit the MENU.
3. How to reset
Refer to “Section 3 Maintenance Mode” to reset the resettable menus (H12, H13, H14).
To Next Page
Loading...
