Sony DNW-A220 - TAPE Maintenance Mode (M0)

3-6
DNW-A220
DNW-A220P
3-2. TAPE Maintenance Mode (M0)
3-2-1. Overviews
The TAPE maintenance mode is used for the maintenance and check of a VTR.
This unit has the nine submodes below.
TAPE Maintenance Mode
3-2. TAPE Maintenance Mode (M0)
3-2-1. Overviews
TAPE MAINTENANCE MODE
C0 : SERVO CHECK
C1 : RF CHECK
C2 : AUDIO/VIDEO CHECK
C3 : BETACAM PB CHECK
A0 : SERVO ADJUST
A1 : RF ADJUST
A2 : AUDIO/VIDEO ADJUST
A3 : BETACAM PB ADJUST
A4 : MECHANISM ADJUST
*