Sony DNW-A220 - Details of Error Messages

2-3
DNW-A220
DNW-A220P
2-2. Details of Error Messages
c
The “protection mode” described in this section means the servo control system automatically stops the
tape transport and drum motor rotation, and maintains this state. The DNW cannot be automatically
recovered to the normal state when the DNW once enters the protection mode. Be sure to turn the power
on again under the absence of the cassette tape.
If the protection mode is entered with the cassette tape inserted, take out the cassette tape manually with
reference to “1-11. How to Take Out the Cassette whose Tape is Slacked”. Never turn the power on
again without taking out the cassette tape. This may damage the tape.
n
The messages on the sub LCD differ from the messages which are superimposed on the LCD monitor in
some items. In this section, each message indicates as following example.
Ex. : ERROR-09 TH/UNTH MOTOR TIME OUT
(TH/UNTH MOTOR)
Message on sub LCD
Message superimposed on LCD monitor
2-2. Details of Error Messages