Menu List
174
Chapter 6 Menu Displays and Detailed Settings
12 CAM
CONFIG 1
REC TALLY
BLINK
OFF/ON Turns the tally illumination control on or off
when the battery is almost exhausted or the
disc is almost full.
REC START BEEP OFF/ON Turns on or off the REC START/STOP alarm
sound.
SUB LCD MODE
SEL
TIMER/OFF/
CONT
Sets the timecode (TC) display after poweroff
as follows.
TIMER: The TC display turns off after the
elapse of the time set by the SUB LCD
TIMER below.
OFF: Not displayed.
CONT: Displayed.
SUB LCD TIMER 1H/3H/8H Sets the duration of time after which the TC
display is to be turned off after power-off,
when the SUB LCD MODE SEL item, above,
is set to “TIMER” (H: hours).
HDSDI REMOTE
I/F
OFF/CHARA/
G-TLY/R-TLY
Selects whether to use the function that
enables recording control from this unit of an
external device connected to one of the SDI
OUT 1/2 connectors (HDSDI output) of this
unit.
g)
Also selects the indication that shows
whether the external device is recording.
OFF: Do not use the remote recording control
function.
CHARA: Use the function, and indicate by
the controlling external device indicator
in the viewfinder (see page 30).
G-TLY: Use the function, and indicate by the
TALLY indicator in the viewfinder.
R-TLY: Use the function, and indicate by the
REC (recording, red tally) indicator in
the viewfinder.
Note
When R-TLY is selected, the TALLY indicator
lights even when the unit is not recording.
PROAV DISPLAY DSABL/ENABL Specifies whether to display the PROAV
directory when this unit is accessed by a
FAM/FTP connection.
DSABL: Do not display.
ENABL: Display.
MIXED
RECORDING
DSABL/ENABL
For details, see “Mixed recording of clips in
different formats on the same disc” on page 53.
SINGLE CLIP
MODE
OFF/ON For details, see “Clip playback modes” on
page 77.
PB POSITION KEEP/TOP When you switch between the clip playback
screen and the clip list playback screen,
specifies the clip or sub clip playback start
position.
KEEP: Play from the position where
playback stopped.
TOP: Play from the first frame of the first clip
or sub clip.
No. Page Item Settings Description
To Next Page
