Plug the DVD-VCR into an AC outlet.
The DVD-VCR automatically presets the DVD-VCR's clock and TV channels when
the DVD-VCR is plugged into the AC outlet.
to AC outlet
AC power cord
The DVD-VCR starts presetting the
clock and channels.
OIITN
!tU m
"UU
When Auto preset is completed, the
current time appears in the display
window.
You have now completed DVD-VCR setup.
To begin using your DVD-VCR, go to "Basic Operations" on page 34.
To change the on-screen disphty language to French or Spanish, see
"Step 4 : Selecting a language" on page 20.
The clock is set using a time signal provided by some TV channels. If the clock is
incorrect, or " :-" appears in the display window, see "Using Manual Clock Set" on
page 24.
To add or disable channels manually, see "Presetting/disabling channels manually"
on page 28.
Notes
• If you connect the AC power cord befure the antenna connections are conlpleted, the channels
may be incorrectly set. If this happens, see "Step 6 : Presetting channels" on page 26.
• Do not press any buttons uu the DVD-VCR ur remote commander during Auto preset.
• Auto preset starts autumatically only when yuu plug in the AC puwer cord for the lirst time
after yuu purchase the DVDWCR.
• Autu preset can be performed by pressing • on the unit continuously fur 5 seconds or more
with the DVD-VCR power turned ofl.
18us Basic hookups
To Next Page
Loading...
