Recording TV programs using the timer
You can preset up to eight programs at a
time.
Before you start...
• Check that the DVD-VCR clock is set to
the correct time.
• Turn on the DVD-VCR and yonr TV.
When using a cable box, turn it on.
• Set the TV to video input so that the signal
from the player appears on the TV screen.
• Set TV / DVD.VIDEO switch to
DVD.VIDEO on the remote.
• Insert a tape with its safety tab in place.
Make sure the tape is longer than the total
recording time.
• If the DVD player is in play mode, you
cannot display the setup menu. Stop the
DVD playback.
Q®®
oood
o ®%
_QQ
'oo®÷
A
TV / DVD.VIDEO
--switch
--SELECT VIDEO
-,--CLEAR
TV/VIDEO
.,,,,,,,,TIMER
INPUT SELECT
_,,,,,,,,II STOP
B::> PLAY
ENTER
--8%RETURN
SELECT
SUBTITLE/
TmMER
©
Press SELECT VIDEO to control the VCR.
Press TIMER.
The timer programming menu appears.
CH START END DATE SPEED
48us Recording TV programs using the timer
To Next Page
Loading...
