3
4
5
6
INPUT
SELECT
O
CLEAR
O
Q
RETURN
Set the channel number, start and stop times,
date, and tape speed:
1 Press * to select each item in turn.
2 Press t_/I, to set each item.
To correct a setting, press _. to return to that
setting and reset.
• To record from a source connected to the
I CHSTA_ E_D DATE
LINE IN 1 or LINE-2 IN jacks, press INPUT SELECT or 4"/1!" to display
"LI" or "L2" in the "CH" position.
To record the same program every clay or the same clay every week, press
!_ while the date is flashing. For details, see "Daily/weekly recording" on
page 49.
To use the Auto Tape Speed function, press !_ to display "Auto" in the
"SPEED" position. For details, see "To use the Auto Tape Speed
fimction" on page 50.
Press * to confirm the setting.
To enter another setting, press t_/!, to select the next row and repeat step 3.
Press CLEAR to cancel the setting.
Press o_ RETURN to exit the menu.
The Q indicator appears in the display window and the VCR stands by for
recording. Timer recording will operate properly regardless if the DVD-
VCR power is on or oft'.
To record from a decoder or other source, leave the connected equipment
switched on.
To stop recording
To stop the DVD-VCR while recording, press SELECT VIDEO and then press
• STOP.
Daily/weekly recording
In step 3, press I" to select tile recording pattern. Each time you press !', tile
indication changes as shown below. Press t_ to change the indication in reverse order.
the current date -_ Daily -_ Mo~Sa -_ Mo~Fr -+Sun's -_ Mon's -_ ..... -_ Sat's
-_ 1 month later -_ (dates count down) -_ the current date
O0
(n
0
"0
o
continued
Recording TV programs using the timer 49us
To Next Page
Loading...
