Sony SLV-D271P - Page 31

I_'lUse this hookup if your TV has an S-VIDEO input jack
Connect an S-VIDEO cord (not supplied). You will elxioy high quality images.
rfflUse this hookup if your TV has component video input jacks
Connect a component video cord (not supplied) or three video cords (not supplied) of
the same kind and length. You will erxioy accurate color reproduction and high quality
images.
If your TV accepts progressive (480p) format signals, you must use this connection
and then set "Progressive" to "On" in the "SCREEN SETUP" menu. For details, see
"To set the "Progressive" setting" (page 58).
Notes
• The connection using S-VIDEO OUT and COMPONENT VIDEO OUT.jacks are only for
the DVD player. The signal lrom the VCR will not be output.
• In the connection using S_VIDEO OUT jack, if you set "Progressive" to ';On" in the
"SCREEN SETUP" menu. S-Video playback may be distorted.
<
o
Q.
"I"
O
O
e-
S-Video/Component Video hookup 31 us