[] Connecting to audio L/R jacks
This connection uses a stereo umplifier's (receiver's) two front speakers for sound.
You can enjoy the surround function that creates virtual speakers from two stereo
speakers. Select from "Surroundl ", "Surround2" or "Surround3" of the surround
effects (page 76).
[] Connecting to a digital audio (COAXIAL) input jack
Use this connection it"your AV amplifier (receiver) has a Dolby *1 Digital or DTS *_
decoder and a digital input ,jack. You can enjoy the surround effect of Dolhy Digital
(5.1ch) or DTS (5.1ch).
" Manufactured under license from Dolby Laboratories.
"Dolby" and thedouble-D symbol are trademarks ofDolby Laboratories.
:2 "DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
Notes
• After you have completed the connection using DIGITAL AUDIO OUT (COAXIAL), be
sure to set "Dolby Digit:d" to "Dolby Digital" and "DTS" to "On" in "AUDIO SETUP"
menu (page 54). Otherwise. no sound or a loud noise will come from the speakers.
• With a coaxial digital connection, you cannot use the virtual surround effects of this recorder.
e_
<
ca
O
Q.
"T-
O
O
"O
A/V Receiver hookup 33 us
To Next Page
Loading...
