Sony SLV-D271P - Page 93

4
PLAY
Q
1
Scan and Play (To search using the index
fimction):
Press * to scan ahead, or I, to scan
backwards.
The VCR searches and then plays back for
about five seconds.
Press [2:> PLAY to view the program.
If you do not press [2:> PLAY, the VCR
automatically searches for the next index
mark, or until it reaches the end of the tape.
• Go to [0:00:00] (To search for the counter
0:00:00 point):
Press tl,.
The VCR starts searching and automatically
stops at the 0:00:00 point.
To mark a point on the tape that you want to
find later, press CLEAR to reset the tape
counter to "0:00:00."
• End search (To search for a blank portion of
the tape)
Press 4.
The VCR starts searching and automatically
stops at the beginning of a blank space. If no
blank space is found, the VCR reaches the end.
Scan and play
0:01:30
Goto[0:00:00}
0:01:30
End search
0:01:30
Note
• Once in recording mode. if tile VCR is put in pause and then released to start the recording,
no index mark will be inserted. An index mark will be inserted if the channel is changed
while VCR is put in pause.
<
O
o
O
tD
o
t_
Searching using various functions 93 us