Before you start editing
• Turn on tile VCR and the TV and set it to
the video channel.
• Press INPUT SELECT to display "LI" or
"L2" in the display window.
• Press SP/EP to select the tape speed, SP or
ER
II • REC
Insert a source tape with its safety tab removed into the other (playback) VCR. Search for
the point to start playback and set it to playback pause.
Insert a tape into this (recording) VCR. Search tUr the point to start recording and press n.
Press • REC on this VCR to set it to recording pause.
To start editing, press the n (pause) buttons on both VCRs at the same time.
To stop editing
Press the • (stop) buttons on both VCRs.
Tip
• To cut out unwanted scenes while editing, press II on this VCR when an unwanted scene
begins. When it ends, press II again to resume recording.
<
0
o
0
0
o
Editing with another VCR 97us
To Next Page
Loading...
