Sourcetronic ST600 - Page 178

Frequency Inverter ST600 Series High-Performance Multifunction VFD Function parameter list
-171-
0x01–0x20: Reserved
0x21: MCU(ST)
0x22–0xFF: Reserved
Bit12–bit15: VFD series
0x0: Reserved
0x1: ST600
0x2: ST600-UL
0x3: ST600SP
0x4–0xF: Reserved
P07.18
Rated power of
VFD
0.4–3000.0kW
/
●
P07.19
Rated voltage of
VFD
50–1200V
/
●
P07.20
Rated current of
VFD
0.1–6000.0A
/
●
P07.21
Factory barcode 1
0x0000–0xFFFF
/
●
P07.22
Factory barcode 2
0x0000–0xFFFF
/
●
P07.23
Factory barcode 3
0x0000–0xFFFF
/
●
P07.24
Factory barcode 4
0x0000–0xFFFF
/
●
P07.25
Factory barcode 5
0x0000–0xFFFF
/
●
P07.26
Factory barcode 6
0x0000–0xFFFF
/
●
P07.27
Present fault type
0: No fault
1: Inverter unit U phase protection (OUt1)
2: Inverter unit V phase protection (OUt2)
3: Inverter unit W phase protection (OUt3)
4: Overcurrent during acceleration (OC1)
5: Overcurrent during deceleration (OC2)
6: Overcurrent during constant speed (OC3)
7: Overvoltage during acceleration (OV1)
8: Overvoltage during deceleration (OV2)
9: Overvoltage during constant speed (OV3)
10: Bus undervoltage fault (UV)
11: Motor overload (OL1)
12: VFD overload (OL2)
13: Phase loss on input side (SPI)
14: Phase loss on output side (SPO)
15: Rectifier module overheat (OH1)
16: Inverter module overheat (OH2)
17: External fault (EF)
18: Modbus/Modbus TCP communication fault (CE)
19: Current detection fault (ItE)
20: Motor autotuning fault (tE)
21: EEPROM operation fault (EEP)
22: PID feedback offline fault (PIDE)
23: Brake unit fault (bCE)
/
●
P07.28
Last fault type
/
●
P07.29
2nd-last fault type
/
●
P07.30
3rd-last fault type
/
●
P07.31
4th-last fault type
/
●
P07.32
5th-last fault type
/
●