Sourcetronic ST600 - Page 66

Frequency Inverter ST600 Series High-Performance Multifunction VFD Basic Operation Instructions
-59-
P00.18
Function parameter
restoration
0: No operation
1: Restore to default value
2: Clear fault records
3: Reserved
4: Reserved
5: Restore default values (for factory test mode)
6: Restore default values (including motor
parameters)
Note: After the selected function operations are
done, this function code will be restored to 0
automatically. Restoration to default value will
clear the user password. Excesise in caution. The
option 5 can be used only for factory testing.
0
P02.00
Type of motor 1
0: Asynchronous motor
1: Synchronous motor
0
P02.01
Rated power of
asynchronous motor 1
0.1–3000.0kW
Model-
dependent
P02.02
Rated frequency of
asynchronous motor 1
0.01Hz–P00.03 (max. output frequency)
50.00Hz
P02.03
Rated speed of
asynchronous motor 1
1–60000rpm
Model-
dependent
P02.04
Rated voltage of
asynchronous motor 1
0–1200V
Model-
dependent
P02.05
Rated current of
asynchronous motor 1
0.8–6000.0A
Model-
dependent
P02.15
Rated power of
synchronous motor 1
0.1–3000.0kW
Model-
dependent
P02.16
Rated frequency of
synchronous motor 1
0.01Hz–P00.03 (max. output frequency)
50.00Hz
P02.17
Number of pole pairs of
synchronous motor 1
1–50
2
P02.18
Rated voltage of
synchronous motor 1
0–1200V
Model-
dependent
P02.19
Rated current of
synchronous motor 1
0.8–6000.0A
Model-
dependent
P05.01–
P05.06
Function of multi-function
digital input terminal (S1–
S4, HDIA, HDIB)
36: Command switches to keypad
37: Command switches to terminal
38: Command switches to communication
/
P07.01
Reserved
/
/
P07.02
QUICK/JOG key function
Range: 0x00–0x27
Ones: QUICK/JOG key function selection
0: No function
1: Jogging
2: Reserved
3: Switching between forward/reverse rotation
0x01