Spectra Geospatial Focus 35 - Control Functions Control Unit Face1; Operating System; Data Storage

3 Getting Started
Item Description
❶
Quick Shot Menu
❷
Measurement 1
❸
Measurement 2
Control Functions Control Unit Face1
In addition to data entry and the standard Microsoft® Windows® operating system functions, the Control
Unit has a number of control functions that are Spectra Geospatial specific. These functions are
described in the table below.
Keys Function Description
M
Measurement1 (in field software only)
L
Measurement2 (in field software only)
R
Quick Shot Menu (in field software only)
T
+
A
C Toggle the backlight on/off
T
+
B
K Disable/enable the touch screen
T
+
Q
S Toggle the touch screen keyboard on/off
T
+
R
I Switch to level bubble - in field software only
T
+
7
Z Pop up the Windows taskbar
T
+
,
+ Enter a “-” or a “+” symbol
T
+
E
Y Delete
Operating System
The FOCUS 35 Total Station runs the Windows CE .Net operating system.
Data Storage
The FOCUS 35 Total Station has two kinds of memory:
l 512 MB RAM
RAM is volatile, and you risk losing data if the power fails.
l 4 GB NAND flash storage memory
FOCUS 35 Total Station User Guide | 31