Spectra Geospatial Focus 35 - Starting and Settings Via Face1 Control Unit (if Fitted)

4 Setup
Starting and Settings via Face1 Control Unit (if fitted)
Screen Actions and Comments
Face1 screen after instrument start While starting Windows CE the SpectraGeospatial logo
screen will show for several seconds and then the menu
to work in Windows CE will appear.
Face1 screen after starting Windows CE Start the Survey Pro™ software by tapping the Survey
Pro icon.
NOTE – StepDrive motor system and Focus System are
already usable at this phase.
NOTE – If you are using the Layout Pro™ software, refer
to the User Guide for information on using the FOCUS 35
total station.
Face1 screen while starting the Survey Pro
software
Instrument loads the Survey Pro software.
Electronic bubble for leveling process After starting the Survey Pro software, the screen shows
the Level menu. Level the instrument with the help of
the electronic bubble.
FOCUS 35 Total Station User Guide | 48