4 Setup
Measuring the Instrument Height
There are two measurement marks on the side of the instrument. The top mark ❶ corresponds to the
trunnion axis of the instrument. The bottom mark ❷ is 0.158 m (0.518 ft) below the top mark. Measure
the bottom mark to the top ridge of the mark.
Instrument height marks:
When the Survey Pro software is running, the software has additional functions that reduce the bottom
mark measurement to the required vertical instrument height to the trunnion axis, see image below and
the following paragraph.
FOCUS 35 Total Station User Guide | 80
To Next Page
Loading...