Spirent SmartBits System - Page 11

About This Guide
Manual Content
SmartBits System Reference 3
Chapter 9, “Ethernet Cards”
Describes Ethernet card features, performance, and
methodology.
Chapter 10, “Packet over
SONET Modules”
Describes POS card features, performance, and
methodology.
Chapter 11, “ATM Cards”
Describes ATM card features, performance, and
methodology.
Chapter 12, “WAN Cards”
Describes WAN card features, performance, and
methodology.
Chapter 13, “Token Ring
Cards”
Describes Tokin Ring card features, performance, and
methodology.
Appendix A, “RFCs and
Standards Supported”
Describes RFCs and Standards supported by SmartBits
applications.
Appendix C, “Certifications
and EMI Compliance”
Describes safety and emission standards, FCC
statement, and EC requirements.
Appendix B, “Auto
Negotiation”
Defines auto negotiation as performed by SmartBits
systems and SmartCards/modules.
Appendix D, “ToS Para me t ers”
Describes type of service values.
Appendix E, “SMB-600/6000B
Cables and Connectors”
Describes the cable and connections features available
for the SMB-600/6000B
Appendix F, “SMB-200/2000
Cables and Connectors”
Describes the cable and connections features available
for the SMB-200/2000
Appendix G, “Serial Port
Commands”
Overview of the serial port command set.
“Glossary of Terms”
Describes common features and terms used with
SmartBits chassis.