Spirent SmartBits System - ATM Applications

Chapter 11: ATM Cards
ATM Applications
144 SmartBits System Reference
ATM Applications
Table 11-1 gives a description of the ATM cards and the applications available for each
SmartBits chassis. These cards apply only to the SMB-200/2000 chassis.
Note: Throughout this manual, the term “card” may be used interchangeably to represent
either SmartCards (SMB-200/2000), or modules (SMB-600/6000B).
Table 11-1. ATM Cards Used in Applications
Card/
Module
Description
SmartWindow 7.10 SmartLib 3.10 SmartApps 2.40 SmartSignaling 3.00 SmartMulticastIP 1.25 SmartFlow 1.30 SmartVoIPQoS 1.00 Ter aRo uting 1.00 AST II (All Tests) SmartTCP 2.00 SmartxDSL 1.10 SCMT 2.00 VAST 2.11 ScriptCenter 1.20 SmartMetrics TeraMetrics
ATM Cards Used in SMB-200/2000 Chassis
AT-9015
DS1(1.544 Mbps) (RJ-45) XXX X X
AT-9020
E1 (2.048 Mbps) (RJ-45)
XXX X X
AT9025
25 Mbps (RJ-45) XXX X X X
AT-9034B
E3 (34 Mbps) (BNC)
XXX X X
AT-9045B
DS3 (45 Mbps) (BNC) XXX X X X
AT-9155C
Multi Mode Fiber OC-3c/STM-1
(155 Mbps) (4 MB RAM)
XXX X X
AT-9155Cs
SingleModeFiberOC-3c/STM-1
(155 Mbps) 1300 nm
XXX X X X
AT-9622
Multi Mode Fiber OC-12c/STM-4
(622 Mbps) 1300 nm
XXX X X X
AT-9622s
SingleModeFiberOC-12c/STM-4
(622 Mbps) 1300 nm
XXX X X X