Chapter 6: Optional Applications
ScriptCenter
SmartBits System Reference 67
ScriptCenter
ScriptCenter is a platform-independent development tool used to write and automatically
generate scripts. ScriptCenter is written in Tcl/Tk and works in Windows, UNIX, and
Linux environments.
ScriptCenter can be used to set up tests, using either customized or provided scripts. The
application automatically generates Tcl code through the use of wizards and task/
command inserts and input screens. A set of card-independent extended commands are
provided, for use anywhere within a script.
A built-in editor allows ScriptCenter to be used to set up anything from an entire test to a
specific routine or single command. Essentially, ScriptCenter serves as a central repository
for all scripts needed to run tests through SmartBits systems.
Refer to the ScriptCenter User Guide located at http://www.netcomsystems.com/support/
documentation.asp for a complete description of the features available.
The following cards can be tested using the following SmartBits chassis:
• In SMB-200/2000:
– GX-1405B, Gigabit Ethernet.
– GX-1405Bs, Gigabit Ethernet, Single Mode.
– GX-1420B, 100/1000 Base-Copper.
– ML-7710, 10/100 Base-TX, SmartMetrics.
– ML-7711, 100 Base-FX Fiber, SmartMetrics.
– ML-5710A, 10 Base Ethernet, USB SmartMetrics.
– SX-7410B, 10/100 Base-TX.
• In SMB-600 and SMB-6000B:
– LAN-3201A, 1000-Base Ethernet, SmartMetrics, Multi Mode.
– LAN-3201As, 1000-Base Ethernet, SmartMetrics, Multi Mode.
– LAN-3201B, SmartMetrics, GBIC.
– LAN-3710A, 10 Gigabit Ethernet, RMII/SMII.
– POS-3500B, POS OC-12/OC-3.
– POS-3500Bs, POS OC-12/OC-3, Single Mode.
– POS-3502A, POS OC-3.
– POS 3502As, POS OC-3, Single Mode.
To Next Page
Loading...