Chapter 5: Core Software Applications
SmartWindow
46 SmartBits System Reference
• SmartWindow allows you to put any combination of SmartCards/modules into any
SmartBits slots. SmartWindow will automatically identify the SmartCards/modules
and give you the proper interface for each port. You can define the traffic to be sent
from each SmartCard/module individually, then Save Global setups for the system.
Tests
Supported:
• Throughput.
• Latency, Latency Variation, Latency Histograms.
• Packet Loss.
• Back-to-Back Performance.
• Point-to-Point.
• Point to Multi-point.
• Multi-point to Multi-point.
• Round Trip Transit Time.
• Illegal Packets.
• Broadcast Traffic.
• Expired Time-to-Live Filtering.
• Address Table Learning.
• Flow Table Learning.
• Congestion Testing.
• Comparative Path Testing and Comparative Protocol Testing.
• Differentiated Class of Service Testing.
• Frame Relay PVC Testing.
• AT M V CC T.
Note: Refer to the SmartWindow User Guide for an explanation of these tests.
SmartMetrics-
Based Results:
• Sequence Tracking.
• Latency over Time.
• Latency per Stream.
• Latency Distribution.
• Raw Tags.
To Next Page
Loading...