Chapter 8: Chassis Specifications
SMB-6000/6000B Specifications
SmartBits System Reference 79
Note:
• For SmartBits certifications and EMI compliance, please refer to Appendix C,
“Certifications and EMI Compliance”
• For detailed cable, connector, and accessory information, please refer to
Appendix E, “SMB-600/6000B Cables and Connectors” and Appendix F, “SMB-
200/2000 Cables and Connectors”
• Other helpful topics located in include “Downloading New Firmware” on page
40,and“Changing Chassis Timeout” on page 41
Connectors
• RS-232 for workstation connection.
• RJ-45 10 Base-T connector for Ethernet connection.
• RJ-45 Expansion In/Out connectors for multiple chassis
connection.
• Connectors to attach to an optional GPS receiver.
GPS Option Available
Operating Temperature
Operating Humidity
59-104
°F(15-40°C)
20 to 80% relative humidity, non-condensing.
Cards Supported All 3xxx series modules (Gigabit Ethernet and POS)
Applications Supported Core Applications, SmartFlow, AST II, BGP Router Test,
SmartMulticastIP, ScriptCenter, SmartVoIPQoS, and SCMT.
Table 8-2 SMB-600/6000B Specifications
Category Description
To Next Page
Loading...