Splicecom PCS 542 - Transferring a Call

Basic Call Handling
PCS 542 User Manual Version 3.3/0714/1
!14
!
Transferring a call
Announced Transfer
Alternatively,
!
Please note that you will only lose the caller if you or the caller hang up. Use the Recall button to
return to the caller.
!
Alternatively,
Alternatively,
!
Unannounced Transfer (Blind Transfer)
!
1
Place the call on hold by pressing the Recall button
2
Enter the number to be dialled (internal or external number).
(If, for example, you enter the wrong number and wish to return to the caller, either
press the Recall button or use the navigation keys to Hang Up.)
3
Wait for the call to be answered and announce the caller
4
To transfer the call, replace your handset or press the Speaker button (if using hands
free). You will no longer have control of the call.
4
To clear the call that you are currently connected to and return to the original call
press the Recall button, or wait for the other end to hang up.
4
To return to the original call and place the second call on hold, press the Switch key.
5
Use the Switch key to toggle between the two calls.
6
Finally, to connect the two calls (regardless of which call you are currently connected
to) replace your handset or press the Speaker button (if using hands free).
6
To clear the call you are currently connected to and return to the other call press the
Recall button or wait for the other end to hang up.
1
Place the call on hold by pressing the Recall button
2
Enter the number to be dialled (internal or external number).
(If, for example, you enter the wrong number and wish to return to the caller, either
press the Recall button or use the navigation keys to select Hang Up.)
3
Once the ringing tone is heard replace your handset or press the Speaker button (if
using hands free). You will no longer have control of the call.
!
PCS 542 User Manual