Settings
The PCS 542 gives you the ability to configure the phones features, These features can be
configured via the Settings menu which can be accessed as follows:
You will be presented with the following options, user the navigation keys to move around the menu
items and accept to select an option:
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
Press settings again to return to main menu once you have adjusted your scene contrast.
!
Defaults Selecting defaults gives you a further 5 options:
!
1) Overlap Dial
By default, when you lift your handset or press the Speaker button and start to dial a number the
telephone system will start to process this number and send the number to your service provider,
such as BT, for example. This is the normal operation of a telephone. However this method is
different to using a phone such as a mobile, where we enter the number in first and then press the
Call button. On a PCS 542 you can decide which method you prefer, you can either go off hook and
start to dial or you can use the Dial Ahead facility as described from page 12. If you wish to always
use the Dial Ahead facility when making a call you can turn off a feature called Overlap Dial as
follows.
!
Turn off Overlap dial
!
!
!
!
!
!
!
This allows you to logout from the phone, and allows other users to login to your
phone as themselves (Hot Desking, Please refer to your system administrator for
further details) NOTE: Please see page 54 if your phone has been setup to use SSL.
To Next Page
Loading...
