User Settings
PCS 542 User Manual Version 3.3/0714/1
!35
•
Companies filter – when the Contacts filter is turned on all contacts matching the letters entered
in the search facility will be displayed. The Companies filter option will determine whether to
include entries where the company name also matches the letters entered. If you would prefer
to display entries where only the name matches the letters entered disable this feature.
These features can be enabled or disabled as follows:
!
5) Headset Ringing
By default, the ringing tone of the PCS 542 will be heard through the phone’s speaker. However, if
you are using a headset you may wish to hear the ringing though the headset instead, and thereby
not disturb your colleagues around you. You can also change this setting so that the ring is heard
through the speaker and your headset.
!
!
From the Settings menu select Defaults by using the navigation keys and
pressing accept
Use the navigation keys to select Directory Filters and then press the
accept key
By default, each option is enabled, indicated by the tick.
If you wish to disable one of these use the navigation keys to select the
relevant option and then press accept to remove the tick.
Note: To enable this option again press accept again to display the tick.
Press the settings key to return to the Settings menu.
From the Settings menu select Defaults by using the navigation keys and
pressing accept
Use the navigation keys to select Headset Ringing and then press the
accept key
Use the Navigation keys and press accept to select one of the
following options:
Speaker – the ringing tone will be heard via the phone’s speaker only (default)
Headset – the ringing tone will be heard via the headset only
Speaker & Headset – the ringing tone will be heard via the speaker and the
headset
A tick will be displayed beside the option selected.
Press the settings key to return to the Settings menu.
To Next Page
Loading...
