1
Technical data are subject to change without notice.
ISO 9001 certified. © Copyright SPM 1996-9. 71416.B
SPM Instrument AB • Box 4 • S-645 21 Strängnäs • Sweden
Tel +46 152 22500 • Fax +46 152 15075 • info@spminstrument.se • www.spminstrument.se
Instruction Manual
Shock Pulse Analyzer A2011
with Data Logging Functions
Part 1 General Description
A survey of instrument functions and accessories. Short description of
the measuring techniques used.
Part 2 Operating Instructions
Instructions for shock pulse, vibration, and speed measurements with the
A2011. Changing batteries. Instrument care.
Part 3 Measuring Routines and Evaluation, SPM
Selection of SPM measuring points. Selection of transducer type. Meas-
uring routes and intervals. Recording shock pulse readings. Interpreta-
tion of shock pulse readings. Disturbance. Follow-up of bearings in bad
condition. Evaluation flow chart.
Part 4 Measuring Routines and Evaluation, VIB
Selection of machine class. Selection of VIB measuring points. Measuring
directions. Recording vibration readings. Interpretation of vibration read-
ings. Evaluation flow chart. Balancing with A2011.
Part 5 Data and Forms
Ordering numbers. Technical data. Follow-up forms.
To Next Page
Loading...
