TRANSMISSION AND BRAKE SYSTEM
6-7
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
GEAR SELECTOR LEVER POSITIONS
P: PARK POSITION
Use this position to park your vehicle, warm up the engine,
or stay in a location for an extended length of time.
To shift into any other position, depress the brake pedal.
• Never shift into “P” when the vehicle is moving, or the trans-
mission will be damaged.
• Stop the vehicle completely before shifting into
“P”.
• To shift from the
“P” position to another position, the ignition switch
must be turned to “ON” and the brake pedal should be depressed.
Any forcible attempts to move the selector lever from
“P” with-
out the two procedures may damage the selector lever.
WARNING
R: REVERSE POSITION
• Use this position to reverse the vehicle.
To shift into “R” from “P” or “N”, completely stop the
vehicle and depress the brake pedal. When the shift lever
is in
“R”, and parking aid system will be activated
(optional (If equipped)).
• Never shift into “R” when the vehicle is moving.
• Please note that the vehicle may slowly move rearward when
the selector lever is at
“R”.
WARNING
As a safety function, the gear selector lever cannot be moved into
“P” or “R” when the vehicle speed is about 8 km/h.
CAUTION
D146_06-Transmission and Brake System.p65 2009-12-30, ¿ÀÀü 3:21Page 7 Adobe PageMaker 6.5K/Win
To Next Page
Loading...
Need help?
General
